The first excited single-proton resonance in 15F by complex-scaled Green's function method

The complex-scaled Green's function(CGF)method is employed to explore the single-proton resonance in 15F.Special attention is paid to the first excited resonant state 5/2+,which has been widely studied in both theory and experiments.However,past studies generally overestimated the width of the 5/2+state.The predicted energy and width of the first excited resonant state 5/2+by the CGF method are both in good agreement with the experimental value and close to Fortune's new estimation.Furthermore,the influence of the potential parameters and quadruple deformation effects on the resonant states are investigated in detail,which is helpful to the study of the shell structure evolution.     

Relative deprivation as a cause of risky behaviors

ABSTRACT

Combining a standard measure of concern about low relative wealth and a standard measure of relative risk aversion leads to a novel explanation of variation in risk-taking behavior identified and documented by social psychologists and economists. We obtain two results: (1) Holding individual i’s wealth and his rank in the wealth distribution constant, the individual’s relative risk aversion decreases when he becomes more relatively deprived as a result of an increase in the average wealth of the individuals who are wealthier than he is. (2) If relative deprivation enters the individual’s utility function approximately linearly then, holding constant individual i’s wealth and the average wealth of the individuals who are wealthier than he is, the individual’s relative risk aversion decreases when he becomes more relatively deprived as a result of a decline in his rank. Our findings provide a theoretical support for evidence about the propensity of relatively deprived individuals to gamble and resort to other risky behaviors.     

Finite groups with a given number of relative centralizers

We will study all finite groups and their subgroups with at most four relative centralizers.     

Empirical Likelihood Inference for Functional Coefficient ARCH-M Model

Empirical likelihood inference for parametric and nonparametric parts in functional coefficient ARCH-M models is investigated in this paper. Firstly, the kernel smoothing technique is used to estimate coefficient function δ(x). In this way we obtain an estimated function with parameter β.Secondly, the empirical likelihood method is developed to estimate the parameter β. An estimated empirical log-likelohood ratio is proved to be asymptotically standard chi-squred, and the maximum empirical likelihood estimation(MELE) for β is shown to be asymptotically normal. Finally, based on the MELE of β, the empirical likelihood approach is again applied to reestimate the nonparametric part δ(x). The empirical log-likelohood ratio for δ(x) is proved to be also asymptotically standard chi-squred. Simulation study shows that the proposed method works better than the normal approximation method in terms of average areas of confidence regions for β, and the empirical likelihood confidence belt for δ(x) performs well.     

Ideal optomechanically induced transparency generation in a cavity optoelectromechanical system

The ideal optomechanically induced transparency effects of an output probe field are investigated in a cavity optoelectromechanical system, which is composed of an optical cavity, a charged mechanical resonator, and a charged object.Although the charged mechanical resonator damping rate is nonzero, the ideal optomechanically induced transparency can still appear due to the non-rotating wave approximation effect in the system. The location of optomechanically induced transparency dip can be controlled via the Coulomb coupling strength. In addition, we find that both the transparency window width and the maximum dispersion curve slope are closely related to the optical cavity decay rate.     

基于碳化硅衬底的宽禁带半导体外延

宽禁带半导体具备禁带宽度大、电子饱和飘移速度高、击穿场强大等优势,是制备高功率密度、高频率、低损耗电子器件的理想材料。碳化硅(SiC)材料具有热导率高、化学稳定性好、耐高温等优点,在SiC衬底上外延宽禁带半导体材料,对充分发挥宽禁带半导体材料的优势,并提升宽禁带半导体电子器件的性能具有重要意义。得益于SiC衬底质量持续提升及成本不断降低,基于SiC衬底的宽禁带半导体电子市场占比呈现逐年增加的态势。在SiC衬底上外延生长高质量的宽禁带半导体材料是提高宽禁带半导体电子器件性能及可靠性的关键瓶颈。本文综述了近年来国内外研究者们在SiC衬底上外延SiC、氮化镓(GaN)、氧化镓(Ga₂O₃)所取得的研究进展,并展望了SiC衬底上宽禁带半导体外延的发展及应用前景。     

Tutorial review on validation of liquid chromatography–mass spectrometry methods: Part II

This is the part II of a tutorial review intending to give an overview of the state of the art of method validation in liquid chromatography mass spectrometry (LC–MS) and discuss specific issues that arise with MS (and MS–MS) detection in LC (as opposed to the “conventional” detectors). The Part II starts with briefly introducing the main quantitation methods and then addresses the performance related to quantification: linearity of signal, sensitivity, precision, trueness, accuracy, stability and measurement uncertainty. The last section is devoted to practical considerations in validation. With every performance characteristic its essence and terminology are addressed, the current status of treating it is reviewed and recommendations are given, how to handle it, specifically in the case of LC–MS methods.     

Power of isotopic fine structure for unambiguous determination of metabolite elemental compositions: In silico evaluation and metabolomic application

In mass spectrometry (MS)-based metabolomics studies, reference-free identification of metabolites is still a challenging issue. Previously, we demonstrated that the elemental composition (EC) of metabolites could be unambiguously determined using isotopic fine structure, observed by ultrahigh resolution MS, which provided the relative isotopic abundance (RIA) of ¹³C, ¹⁵N, ¹⁸O, and ³⁴S. Herein, we evaluated the efficacy of the RIA for determining ECs based on the MS peaks of 20,258 known metabolites. The metabolites were simulated with a ≤25% error in the isotopic peak area to investigate how the error size effect affected the rate of unambiguous determination of the ECs. The simulation indicated that, in combination with reported constraint rules, the RIA led to unambiguous determination of the ECs for more than 90% of the tested metabolites. It was noteworthy that, in positive ion mode, the process could distinguish alkali metal-adduct ions ([M + Na]⁺ and [M + K]⁺). However, a significant degradation of the EC determination performance was observed when the method was applied to real metabolomic data (mouse liver extracts analyzed by infusion ESI), because of the influence of noise and bias on the RIA. To achieve ideal performance, as indicated in the simulation, we developed an additional method to compensate for bias on the measured ion intensities. The method improved the performance of the calculation, permitting determination of ECs for 72% of the observed peaks. The proposed method is considered a useful starting point for high-throughput identification of metabolites in metabolomic research.     

Adsorption of the anionic surfactant sodium dodecyl sulfate on a C18 column under micellar and high submicellar conditions in reversed‐phase liquid chromatography

Micellar liquid chromatography makes use of aqueous solutions or aqueous‐organic solutions containing a surfactant, at a concentration above its critical micelle concentration. In the mobile phase, the surfactant monomers aggregate to form micelles, whereas on the surface of the nonpolar alkyl‐bonded stationary phases they are significantly adsorbed. If the mobile phase contains a high concentration of organic solvent, micelles break down, and the amount of surfactant adsorbed on the stationary phase is reduced, giving rise to another chromatographic mode named high submicellar liquid chromatography. The presence of a thinner coating of surfactant enhances the selectivity and peak shape, especially for basic compounds. However, the risk of full desorption of surfactant is the main limitation in the high submicellar mode. This study examines the adsorption of the anionic surfactant sodium dodecyl sulfate under micellar and high submicellar conditions on a C₁₈ column, applying two methods. One of them uses a refractive index detector to obtain direct measurements of the adsorbed amount of sodium dodecyl sulfate, whereas the second method is based on the retention and peak shape for a set of cationic basic compounds that indirectly reveal the presence of adsorbed monomers of surfactant on the stationary phase.